Bobst Alpina 145 A3 Matic – Folder Gluer

Lock bottom4/6 cornersBasic Equipment:ACCUFEEDTotal length: 1650 mmbelt infeed conveyors with built-in mechanical vibrator with lateral movement using a handwheelThickness gaugeWith lateral and longitudinal adjustment and upper infeed rollersAdditional thickness gaugeWith lateral and longitudinal adjustment and upper infeed rollers2 x Two-part side fencesAsymmetrical and longitudinally adjustableMaximum height of the stack of blanks: 400 mmPneumatic lifting systemTo lower the infeed conveyors to free the upper elementsReducer motor controlled by a frequency converterFor feeding the infeed belts and putting them into or out of serviceSet of rear guides to support the blanks2 x Lower conveyorsWith 25 mm belts and 2 obliquely adjustable upper conveyors For perfect alignment of the blanks2x Upper conveyorsLeft crease breaker positioned at 90°2 x Lower support guidesBREAKERTotal length: 3300 mmLower left conveyor with 50 mm beltLower right conveyor with 25 mm beltLower central conveyor with 25 mm beltSet of upper conveyors with 25 mm belts and lifting deviceLeft creaser without belt with built-in presserWith eccentric adjustmentMaximum width of the gluing path 30 mmRe-opening guideRight creaser with 50 mm pre-breaking beltIncludes a system for adjusting the pre-breaking angleSelf-adjusting propeller reopening deviceCOMBIFOLDER ITotal length 1600 mm3 Lower conveyors with 25 mm beltsSet of upper conveyors with longitudinal adjustment with 25 mm belts and lifting deviceSet of rotary hooks powered by an electronic motorThe trajectory of the hooks is automatically adjusted according to the size of the rear flaps3 x Device for vertical adjustment of the axis of the rotary hooksAccording to the size of the rear flaps and for putting the rotary hooks into or out of serviceSet of hooks and folding propellers combined with a cable deviceFor holding and folding composite flaps of all sizes2 x Lower support guidesWith lateral adjustment system and unblockingSafety doorsCOMBIFOLDER IITotal length 2750 mm3 x Lower conveyors with 25 mm beltsSet of upper conveyors with longitudinal adjustment with 25 mm belts and lifting deviceCentral upper conveyor with 25 mm belts11 x Set of rotary hooks powered by an electronic motorThe trajectory of the hooks is automatically adjusted according to the size of the rear flapsDevice for vertical adjustment of the axis of the hooksAccording to the size of the rear flaps and for switching on or off the rotary hooksSeries of hooks, bending screws and guidesMotorized tool holder frameFor switching on or off the central upper conveyor and the bending accessoriesLower support guides Safety doorsNote: COMBIFOLDERS require I HHS extrusion gluing station and JUpper pressure belt\GLUERSLeft lower gluer with disk and double scraperRemovable glue tankUpper guide with pressure rollersFilling bottleThe available track widths are: 3, 5, 7, I0, 15 mm2 glue track widths:_5 and 15 mm_FOLDERSTotal length: 4070 mm2 x Lower conveyors with 50 mm beltsCentral lower and upper conveyor with 25 mm beltThey ensure good support when transporting disproportionate or large-format boxes.The lower conveyor is mobile and the upper conveyor is liftable by pneumatic spindles for quick shutdown without disassembly2 Set of upper conveyors with longitudinal adjustment with 25 mm belts and lifting device2 x Folding equipment with 50/25 mm beltsMinimum format for flat folded boxes: I 06 mm wide2 x Folding blades with tapered rollers; vertical rollers of caliberPressure rollers adjustable by eccentrics2 x Speed ​​variators for the folding belts2 x Integrated devices for lifting the folding belts on the left and rightFor folding boxes with large flapsSafety sensor with flexible contactCONVEYORSTotal length: 1700 mm2 x Lower and upper conveyors with longitudinal adjustment with 30 mm beltsWith automatic belt tensioning systemSystem for vertical adjustment of the lower and upper conveyor outputSpeed ​​variatorFor the control and speed variation of the lower and upper conveyor beltsSafety sensor with flexible contactOUTPUTWidth of the belt: 1200 mmTotal length: 6600 mmPressure length: 3675 mmPneumatic pressure system adjustable by means of spindles3 x independent adjustment zones and 1 independent rollerAutomatic guidance and lateral correction system of the lower and upper belts2 x Introducers with 35 mm beltsScale regulatorFor automatic stop of the output in the event of interruption of the case arrivalCommand for temporary acceleration of the outputControl for independent start of the output with the machine stoppedReduction motor controlled by a frequency variatorWith automatic system for speed regulation according to the gap between the blanks to maintain a regular scale pitchMotor for longitudinal movement of the upper partBOBST-ELECTRONIC SYSTEMControl units containing the electrical and electronic equipment positioned on the machineCentralized microprocessor control type CUBE (Bobst Electronic Control Unit) with color screen for the management of the machine functionsRemote-controlled mobile control boxBobst-Electronic counting deviceWith pneumatic control of the beater in length depending on the speed of the machine with sprayAuxiliary control points placed in different positions of the machineAsynchronous motor with frequency variatorComplementary equipmentA-5 MOTORIZATIONMotorization for lateral positioning <lei main componentsB-32 6-ANGLE DEVICEFor folding boxes with 6 corners. It is composed of a complementary folder length 1850 mm with a 30 mm folding belt. This element is positioned on the left conveyor of the Combifolder IIDX-29 GLUE APPLICATION SYSTEM IIIS WITH QUALITY CONTROL POSSIBILITY (max. machine speed 650 m/min.)For upper glue application (continuous, intermittent or by points) maximum 8 successive tracks per gunConsisting of: 1 XT-E8 8-channel programmer with 10.4″ color touch screen with modularelectrical cabinet, retrofitting option for guns, 9: 1 high pressure pump with automatic pressure regulator, mounting kit for pulse generator, cable set, alarm light, glue level control, 8-outlet distributor, 8 channels for guns, 8 channels for photocells, folding station station, 2 power lineslength 2 m for P500 guns at one nozzle, photocell, fixing supports Maximum machine speed650 ml/min2 x DX-31 PS00 ADDITIONAL GUNP-500 applicator with one nozzle with photocell, fixing support, feeding length 5 mEA-6 MAIN GAUGE WITH LONGITUDINAL AND LATERAL ADJUSTMENTWith toothed chain presser and motor feed with adjustment of the support force on the blanks by means of a potentiometerReplaces the thickness gauge delivered with the basic machine. It is possible toequip the Accufeed with 2 main gaugesEA-25 SUCTION DEVICE FOR BLANKSVacuum chambers for the two perforated introduction belts with suction pump.Ensures better adhesion of the blanks on the belts and facilitates the introduction of slippery cases made of thick cardboard and corrugated cardboardEA-26 n° 2 ADDITIONAL SUCTION BELTSVacuum chambers for the 2 perforated feeder belts, ensure better adhesion of the blanks on the belts and improve the introduction of slippery blanks made of thick cardboard and corrugated cardboardEA-35 INDEPENDENT UPPER CARRIAGEFacilitates the control of the introduction of disproportionate medium and large format blanksF-5 CENTRAL UPPER CONVEYOR AT THE OUTPUTFixing support with ball bearings for better lateral adjustment.Provides good support when transporting disproportionate medium or large format boxesHA-1 LEFT AND RIGHT PRESSURESWith digital indicator of the distances between the rollersTo ensure constant pressure on the folds. Recommended equipment for working in stretched cardboard, with manual lateral movement and independent vertical adjustment. They arecomposed of lower and upper rollers with micrometric adjustment and precise indicatorof the gap between the rollersHB-l0 FRONT RECTIFIER PLACED ON THE CONVEYOREnsures good squaring of disproportionate boxes in heavy-weight stretched cardboard orcorrugated cardboard.It is composed of rotating pins operated by pneumatic spindles.J-11 UPPER PRESSURE BELTEnsures gluing on non-uniform thicknesses of boxesThis accessory is essential for self-locking bottom and double-wall boxesJ-21 LIQUID MARKER FOR OUTLET A-13OUTLET A-13 IS INCLUDED IN THE BASIC EQUIPMENTFor UV ink marking of the counted boxIt is recommended for large-format boxes made of heavy-weight or corrugated cardboard and consists of an ink sprayer and a UV light ramp that detects the markingJ-26 LEFT AND RIGHT INTRODUCER AND RECTIFIER FOR OUTLET A-13OUTLET A-13 IS INCLUDED IN THE BASIC EQUIPMENTEnsures good squaring of disproportionate boxes made of corrugated cardboardIt is composed of correcting pins operated by pneumatic spindlesK-12 PIN EJECTOR (Flipper)For the ejection of all types of non-conforming boxes in flat or corrugated cardboard type N/FIE wave.It is composed of deviation pins operated by electronically controlled pneumatic spindlesK-15 GLUE LEVEL CONTROL DEVICEEnsures a constant level of glue in the lower left gluer tank.Consisting of a probe and an automatic tank filling system KX-1HHS CODE READER COMBINED WITH DX-29 GLUE APPLICATORIt consists of: 1 CR code reading module with 4 measurement channels, 2 reading channels forcolor or black and white code, 2 channels for EAN/UPC code or 2D Matrix code, 1 reading head for color or black and white (monochrome) code 12 m long bus cable for connection to the C.U.B.E. control boxKX-20HHS DEVICE FOR CONTROL OF THE LOWER GLUE TRACELEFT COMBINED WITH THE DX-29 GLUE APPLICATORIt is composed of: Glue Vision Disk module with 2 measurement channels, 1 LNT 10 microwave reading head with support, 12 m long bus cable for connection to the C.U.B.E. control boxKX-60HHS DEVICE FOR CONTROL OF UPPER GLUE TRACES 2TRACES COMBINED WITH THE DX-29 GLUE APPLICATION SYSTEMIt consists of: 1 additional J-8 glue detector for adaptation to the existing XTS system, 1 bus cable 12 m long for connection to the C.U.B.E. control box, 2 detection lines (length 2 rn) with ULT-200 glue detectors6 x KX-62 HHS READING HEAD FOR CONTROL OF AN UPPER GLUE TRACEADDITIONALIt consists of: 1 glue detection headNote: maximum 6 additional detectorsHANDLE POSITION CONTROLL-12 MATIC SYSTEMEnsures automatic and precise movement of the MOTORIZED elements of the machineThe management of production data and the launch of a job are carried out via a computer equipped with a flat touch screen mounted on a swivel console placed on.Accufeed– The introduction and storage of the dimensions of a box Capacity of 30 alphabetical digits and 30 numerical digits for the identification of the jobs– Notepad: unlimited number of lines– The memorization and recall of the jobs recorded on the hard disk are easilyperformedStorage capacity for 5,000 jobs