Bobst Alpina 145 A3 Matic – Folder Gluer

Lock bottom 4/6 corners Basic Equipment: ACCUFEED Total length: 1650 mm belt infeed conveyors with built-in mechanical vibrator with lateral movement using a handwheel Thickness gauge With lateral and longitudinal adjustment and upper infeed rollers Additional thickness gauge With lateral and longitudinal adjustment and upper infeed rollers 2 x Two-part side fences Asymmetrical and longitudinally adjustable Maximum height of the stack of blanks: 400 mm Pneumatic lifting system To lower the infeed conveyors to free the upper elements Reducer motor controlled by a frequency converter For feeding the infeed belts and putting them into or out of service Set of rear guides to support the blanks 2 x Lower conveyors With 25 mm belts and 2 obliquely adjustable upper conveyors For perfect alignment of the blanks 2x Upper conveyors Left crease breaker positioned at 90° 2 x Lower support guides BREAKER Total length: 3300 mm Lower left conveyor with 50 mm belt Lower right conveyor with 25 mm belt Lower central conveyor with 25 mm belt Set of upper conveyors with 25 mm belts and lifting device Left creaser without belt with built-in presser With eccentric adjustment Maximum width of the gluing path 30 mm Re-opening guide Right creaser with 50 mm pre-breaking belt Includes a system for adjusting the pre-breaking angle Self-adjusting propeller reopening device COMBIFOLDER I Total length 1600 mm 3 Lower conveyors with 25 mm belts Set of upper conveyors with longitudinal adjustment with 25 mm belts and lifting device Set of rotary hooks powered by an electronic motor The trajectory of the hooks is automatically adjusted according to the size of the rear flaps 3 x Device for vertical adjustment of the axis of the rotary hooks According to the size of the rear flaps and for putting the rotary hooks into or out of service Set of hooks and folding propellers combined with a cable device For holding and folding composite flaps of all sizes 2 x Lower support guides With lateral adjustment system and unblocking Safety doors COMBIFOLDER II Total length 2750 mm 3 x Lower conveyors with 25 mm belts Set of upper conveyors with longitudinal adjustment with 25 mm belts and lifting device Central upper conveyor with 25 mm belts 11 x Set of rotary hooks powered by an electronic motor The trajectory of the hooks is automatically adjusted according to the size of the rear flaps Device for vertical adjustment of the axis of the hooks According to the size of the rear flaps and for switching on or off the rotary hooks Series of hooks, bending screws and guides Motorized tool holder frame For switching on or off the central upper conveyor and the bending accessories Lower support guides Safety doors Note: COMBIFOLDERS require I HHS extrusion gluing station and J Upper pressure belt \GLUERS Left lower gluer with disk and double scraper Removable glue tank Upper guide with pressure rollers Filling bottle The available track widths are: 3, 5, 7, I0, 15 mm 2 glue track widths:_5 and 15 mm_ FOLDERS Total length: 4070 mm 2 x Lower conveyors with 50 mm belts Central lower and upper conveyor with 25 mm belt They ensure good support when transporting disproportionate or large-format boxes. The lower conveyor is mobile and the upper conveyor is liftable by pneumatic spindles for quick shutdown without disassembly 2 Set of upper conveyors with longitudinal adjustment with 25 mm belts and lifting device 2 x Folding equipment with 50/25 mm belts Minimum format for flat folded boxes: I 06 mm wide 2 x Folding blades with tapered rollers; vertical rollers of caliber Pressure rollers adjustable by eccentrics 2 x Speed ​​variators for the folding belts 2 x Integrated devices for lifting the folding belts on the left and right For folding boxes with large flaps Safety sensor with flexible contact CONVEYORS Total length: 1700 mm 2 x Lower and upper conveyors with longitudinal adjustment with 30 mm belts With automatic belt tensioning system System for vertical adjustment of the lower and upper conveyor output Speed ​​variator For the control and speed variation of the lower and upper conveyor belts Safety sensor with flexible contact OUTPUT Width of the belt: 1200 mm Total length: 6600 mm Pressure length: 3675 mm Pneumatic pressure system adjustable by means of spindles 3 x independent adjustment zones and 1 independent roller Automatic guidance and lateral correction system of the lower and upper belts 2 x Introducers with 35 mm belts Scale regulator For automatic stop of the output in the event of interruption of the case arrival Command for temporary acceleration of the output Control for independent start of the output with the machine stopped Reduction motor controlled by a frequency variator With automatic system for speed regulation according to the gap between the blanks to maintain a regular scale pitch Motor for longitudinal movement of the upper part BOBST-ELECTRONIC SYSTEM Control units containing the electrical and electronic equipment positioned on the machine Centralized microprocessor control type CUBE (Bobst Electronic Control Unit) with color screen for the management of the machine functions Remote-controlled mobile control box Bobst-Electronic counting device With pneumatic control of the beater in length depending on the speed of the machine with spray Auxiliary control points placed in different positions of the machine Asynchronous motor with frequency variator Complementary equipment A-5 MOTORIZATION Motorization for lateral positioning <lei main components B-32 6-ANGLE DEVICE For folding boxes with 6 corners. It is composed of a complementary folder length 1850 mm with a 30 mm folding belt. This element is positioned on the left conveyor of the Combifolder II DX-29 GLUE APPLICATION SYSTEM IIIS WITH QUALITY CONTROL POSSIBILITY (max. machine speed 650 m/min.) For upper glue application (continuous, intermittent or by points) maximum 8 successive tracks per gun Consisting of: 1 XT-E8 8-channel programmer with 10.4″ color touch screen with modular electrical cabinet, retrofitting option for guns, 9: 1 high pressure pump with automatic pressure regulator, mounting kit for pulse generator, cable set, alarm light, glue level control, 8-outlet distributor, 8 channels for guns, 8 channels for photocells, folding station station, 2 power lines length 2 m for P500 guns at one nozzle, photocell, fixing supports Maximum machine speed 650 ml/min 2 x DX-31 PS00 ADDITIONAL GUN P-500 applicator with one nozzle with photocell, fixing support, feeding length 5 m EA-6 MAIN GAUGE WITH LONGITUDINAL AND LATERAL ADJUSTMENT With toothed chain presser and motor feed with adjustment of the support force on the blanks by means of a potentiometer Replaces the thickness gauge delivered with the basic machine. It is possible to equip the Accufeed with 2 main gauges EA-25 SUCTION DEVICE FOR BLANKS Vacuum chambers for the two perforated introduction belts with suction pump. Ensures better adhesion of the blanks on the belts and facilitates the introduction of slippery cases made of thick cardboard and corrugated cardboard EA-26 n° 2 ADDITIONAL SUCTION BELTS Vacuum chambers for the 2 perforated feeder belts, ensure better adhesion of the blanks on the belts and improve the introduction of slippery blanks made of thick cardboard and corrugated cardboard EA-35 INDEPENDENT UPPER CARRIAGE Facilitates the control of the introduction of disproportionate medium and large format blanks F-5 CENTRAL UPPER CONVEYOR AT THE OUTPUT Fixing support with ball bearings for better lateral adjustment. Provides good support when transporting disproportionate medium or large format boxes HA-1 LEFT AND RIGHT PRESSURES With digital indicator of the distances between the rollers To ensure constant pressure on the folds. Recommended equipment for working in stretched cardboard, with manual lateral movement and independent vertical adjustment. They are composed of lower and upper rollers with micrometric adjustment and precise indicator of the gap between the rollers HB-l0 FRONT RECTIFIER PLACED ON THE CONVEYOR Ensures good squaring of disproportionate boxes in heavy-weight stretched cardboard or corrugated cardboard. It is composed of rotating pins operated by pneumatic spindles. J-11 UPPER PRESSURE BELT Ensures gluing on non-uniform thicknesses of boxes This accessory is essential for self-locking bottom and double-wall boxes J-21 LIQUID MARKER FOR OUTLET A-13 OUTLET A-13 IS INCLUDED IN THE BASIC EQUIPMENT For UV ink marking of the counted box It is recommended for large-format boxes made of heavy-weight or corrugated cardboard and consists of an ink sprayer and a UV light ramp that detects the marking J-26 LEFT AND RIGHT INTRODUCER AND RECTIFIER FOR OUTLET A-13 OUTLET A-13 IS INCLUDED IN THE BASIC EQUIPMENT Ensures good squaring of disproportionate boxes made of corrugated cardboard It is composed of correcting pins operated by pneumatic spindles K-12 PIN EJECTOR (Flipper) For the ejection of all types of non-conforming boxes in flat or corrugated cardboard type N/FIE wave. It is composed of deviation pins operated by electronically controlled pneumatic spindles K-15 GLUE LEVEL CONTROL DEVICE Ensures a constant level of glue in the lower left gluer tank. Consisting of a probe and an automatic tank filling system   KX-1HHS CODE READER COMBINED WITH DX-29 GLUE APPLICATOR It consists of: 1 CR code reading module with 4 measurement channels, 2 reading channels for color or black and white code, 2 channels for EAN/UPC code or 2D Matrix code, 1 reading head for color or black and white (monochrome) code 12 m long bus cable for connection to the C.U.B.E. control box KX-20HHS DEVICE FOR CONTROL OF THE LOWER GLUE TRACE LEFT COMBINED WITH THE DX-29 GLUE APPLICATOR It is composed of: Glue Vision Disk module with 2 measurement channels, 1 LNT 10 microwave reading head with support, 12 m long bus cable for connection to the C.U.B.E. control box KX-60HHS DEVICE FOR CONTROL OF UPPER GLUE TRACES 2 TRACES COMBINED WITH THE DX-29 GLUE APPLICATION SYSTEM It consists of: 1 additional J-8 glue detector for adaptation to the existing XTS system, 1 bus cable 12 m long for connection to the C.U.B.E. control box, 2 detection lines (length 2 rn) with ULT-200 glue detectors 6 x KX-62 HHS READING HEAD FOR CONTROL OF AN UPPER GLUE TRACE ADDITIONAL It consists of: 1 glue detection head Note: maximum 6 additional detectors HANDLE POSITION CONTROL L-12 MATIC SYSTEM Ensures automatic and precise movement of the MOTORIZED elements of the machine The management of production data and the launch of a job are carried out via a computer equipped with a flat touch screen mounted on a swivel console placed on. Accufeed – The introduction and storage of the dimensions of a box Capacity of 30 alphabetical digits and 30 numerical digits for the identification of the jobs – Notepad: unlimited number of lines – The memorization and recall of the jobs recorded on the hard disk are easily performed Storage capacity for 5,000 jobs